The Ford Barn - View Single Post

H. L. Chauvin · 10-23-2016, 09:26 PM

Prior to considering welding or soldering, FWIW, I have had success with name brand twin tube epoxy.

Completely drain tank, allow to dry inside thoroughly, remove "all" exterior paint to bare, "clean" oil free metal, mix epoxy according to directions, & apply.

Allow to dry a minimum of 24 hours.

10-23-2016, 09:26 PM	#2
H. L. Chauvin Senior Member Join Date: May 2010 Posts: 4,179	Re: Gas Tank Leak Prior to considering welding or soldering, FWIW, I have had success with name brand twin tube epoxy. Completely drain tank, allow to dry inside thoroughly, remove "all" exterior paint to bare, "clean" oil free metal, mix epoxy according to directions, & apply. Allow to dry a minimum of 24 hours.