Quote:
Originally Posted by Bob C
With the grease fitting remove can you get grease to go through the fitting? If yes
try running a drill bit in the spindle hole to get the dried grease out.
Bob
|
Bob, yes, I can get grease through the fitting. I even swapped the top and bottom fittings just to be sure. Any other ways to get the dried grease out of the joint? Again, it is only the upper kingpin greasepoint on the passenger side.
Does it make a difference what direction I have the wheels turned when I go to lube with the greasegun???
And, yes, both wheels are off the ground.