The Ford Barn - View Single Post - Help

PC/SR · 10-07-2021, 04:47 PM

You can remove the ubolts and the crank bearing plate. The weight of the engine will keep the cross member and springs in place and you can inspect if the bolt head is in the square hole. If you are nervous wrap a chain around the xmember.

10-07-2021, 04:47 PM	#15
PC/SR Senior Member Join Date: May 2010 Location: Santa Rosa, CA Posts: 1,279	Re: Help - Front End is Off Center You can remove the ubolts and the crank bearing plate. The weight of the engine will keep the cross member and springs in place and you can inspect if the bolt head is in the square hole. If you are nervous wrap a chain around the xmember.