The Ford Barn - View Single Post

mike42 · 04-10-2021, 06:59 AM

Morning guys......

I'm going to use the sealer material for bleeder vales for sure. That was never mentioned before. I think I have a tube of that and will look today.

Hal.....I am using Speed Bleeders which surprises me that I having so much trouble.

The one thing I not doing is having someone pump the brake to help me. Rather I've been using the Vacuum pump and maybe that is my whole problem. My next step is to block off the front brakes via the split fitting at end of Master with a plug and see if I can get the backs bled with a friend of mines help.

The drama goes on for sure, but thx for all the suggestions and help !

Mike

04-10-2021, 06:59 AM	#32
mike42 Senior Member Join Date: Jun 2012 Location: Gaylord, Michigan Posts: 1,605	Re: '40 Brake Bleeding Morning guys...... I'm going to use the sealer material for bleeder vales for sure. That was never mentioned before. I think I have a tube of that and will look today. Hal.....I am using Speed Bleeders which surprises me that I having so much trouble. The one thing I not doing is having someone pump the brake to help me. Rather I've been using the Vacuum pump and maybe that is my whole problem. My next step is to block off the front brakes via the split fitting at end of Master with a plug and see if I can get the backs bled with a friend of mines help. The drama goes on for sure, but thx for all the suggestions and help ! Mike