Re: Distributor shaft screw size
don,
Something I learned the hard way ... pay attention to length of screw that Bob C posted!
If the screw is too long it will bottom out and cam will never get tight.
Originally Ford used a thin lock washer AND a thin flat washer.
If either one is missing, the screw will "bottom out" when using original Ford screw.
SOME of the recent Repro screws come with a THICK lockwasher (twice the thickness of Ford lockwasher and no thin flat washer.
Last edited by Benson; 12-24-2019 at 08:58 AM.
|