The Ford Barn - View Single Post

Railcarmover · 09-13-2017, 08:22 AM

Its not tricky to center a stud in a press and insure the force remains on the stud during assembly. The hub and drum should 'float' so they are allowed to seat together during the swedging. Buy a swedging tool (about 8 bucks from the vendors)and show your local machine shop what you want done.

09-13-2017, 08:22 AM	#5
Railcarmover BANNED Join Date: Apr 2017 Location: Sacramento Posts: 1,262	Re: Need wheel bolt swaged into rear hub Its not tricky to center a stud in a press and insure the force remains on the stud during assembly. The hub and drum should 'float' so they are allowed to seat together during the swedging. Buy a swedging tool (about 8 bucks from the vendors)and show your local machine shop what you want done.