The Ford Barn - View Single Post

joltesvig · 07-10-2018, 08:26 AM

The starter key switch has armor all the way into the bottom of the distributor. I already replaced the spark coil with a new one. Still have no spark so I think the starter key switch has gone bad. Before going to all the trouble of replacing the key switch, I want to test it but the armor prevents me from doing a continuity test as far as I can tell. Is there an easy way to do a continuity test on the starter key switch?

07-10-2018, 08:26 AM	#1
joltesvig Senior Member Join Date: May 2011 Location: Carthage, NC Posts: 147	Starter Switch Test The starter key switch has armor all the way into the bottom of the distributor. I already replaced the spark coil with a new one. Still have no spark so I think the starter key switch has gone bad. Before going to all the trouble of replacing the key switch, I want to test it but the armor prevents me from doing a continuity test as far as I can tell. Is there an easy way to do a continuity test on the starter key switch? __________________ John the Model A Rookie from North Carolina