[MALAK]

Originally Posted by 30 Closed Cab PU

MALAK - Thanks for the reply. No worries about response time. Your data confirms some suspecions/theory's I have and others have observed. If you get around to the next steps, am looking forward to a similar chart.


Do not remember seeing in this, what radiator are you using , Brand, 3 or 4 row, # of fins?


Perhaps I missed it, what coolant are you using?


Same data without Thermostat would also be interesting, but you would most likely have to record ambient temp and air flow on the engine side of the radiator. Not asking you to do this, just as a matter of discussion.


No rush for your response.

So I checked and my radiator is 3 row, 10 fins per inch.