View Single Post
Old 10-19-2015, 08:02 AM   #9
truckdog62563
Senior Member
 
truckdog62563's Avatar
 
Join Date: May 2010
Location: Rochester, Il
Posts: 599
Default Re: Ford Milk Truck - 1930's

It's a misnomer. Divco never used these wheels. In fact few milk trucks I've ever seen were half tons and spec'd to use the 5 x 5.5" or 5 x 10.25" bolt patterns. Divco traditionally used wheels made by Motor Wheel Corporation, not Kelsey-Hayes, and most had a 6 x 7.25" bolt pattern. The "rural delivery" or "high clearance" names are more correct. Stu
__________________
Stu McMillan
Marmon-Herringtons
truckdog62563 is offline   Reply With Quote