Sponsored Links (Register now to hide all advertisements)
Quote:
Originally Posted by Jacksonlll
Tighten things up. The dist should be solid with no movement.
|
It's only the plastic distributor body moving. Rocking is probably the wrong word to describe it. When I retard the timing it moves the arm counter clockwise which pushes the distributor body counterclockwise but in a swinging motion as the pin holds at the slot. It touching sets it in motion and it moves by itself at that point. It doesn't push it to its movement limit. At the very least it takes part of the body away from one or more of the plug contacts to some degree. I hope that makes sense.