The Ford Barn - View Single Post

farmerjohn39 · 05-07-2019, 10:42 AM

Hi BillCNC
In the last week I purchased a NEW " Air Balanced Carburetor" from Synders, just so I could install a air filter on the carburetor' and I have nothing nothing but problems with the new carburetor.
The first one Synders sent me leaked gas through the casting ( I think it was a pin hole in the casting) Called Synders they sent me out a replacement for the defective one.
The second new carburetor from Synders didn't leak gas, but it wouldn't let the car run over 30 mi. per. hr. also it wouldn't run or idle down unless the GAV was open 1 to 1 1/4. I removed the air filter and that didn't help so I gave up and put the old stock ZENITH back on w/ no filter the motor ran ok. (if its not broke don't fix until it is broke)

I returned both carburetors to Synders and canceled my order. Snyders quality has been very good, I think they just got a bad batch from there supplier.

Regards farmerjohn

05-07-2019, 10:42 AM	#11
farmerjohn39 Junior Member Join Date: Jul 2015 Location: Elyria, Ohio Posts: 8	Re: Carb Issues Hi BillCNC In the last week I purchased a NEW " Air Balanced Carburetor" from Synders, just so I could install a air filter on the carburetor' and I have nothing nothing but problems with the new carburetor. The first one Synders sent me leaked gas through the casting ( I think it was a pin hole in the casting) Called Synders they sent me out a replacement for the defective one. The second new carburetor from Synders didn't leak gas, but it wouldn't let the car run over 30 mi. per. hr. also it wouldn't run or idle down unless the GAV was open 1 to 1 1/4. I removed the air filter and that didn't help so I gave up and put the old stock ZENITH back on w/ no filter the motor ran ok. (if its not broke don't fix until it is broke) I returned both carburetors to Synders and canceled my order. Snyders quality has been very good, I think they just got a bad batch from there supplier. Regards farmerjohn __________________ 1930 Tudor