The Ford Barn - View Single Post

62pan · 09-24-2019, 02:30 PM

I understand that you should have .040 squish area between head and piston. If you are able to remove some from the piston that is best. I had the same problem but it was my choice to run double head gaskets. It has been five years with no problems.

09-24-2019, 02:30 PM	#2
62pan Senior Member Join Date: May 2010 Location: Middletown Pa Posts: 391	Re: piston hit the head I understand that you should have .040 squish area between head and piston. If you are able to remove some from the piston that is best. I had the same problem but it was my choice to run double head gaskets. It has been five years with no problems.