View Single Post
Old 06-30-2017, 07:35 PM   #1
1934
Senior Member
 
1934's Avatar
 
Join Date: Jul 2010
Location: Quebec, Canada
Posts: 415
Default '34 cut-out question

The cut-out on my '34 isn't working properly so I have to drive with the cowl lights on so I don't over charge the battery. I set the charging rate as low as possible but it still shows 7 or 8 amps at speed, (with cowl lights on it stays around 4 or 5). I took the cut-out apart and sanded the points with emery paper but it made no difference. So I bought a new cut-out and there is still no difference.
Is it possible there is something wrong with the generator and it's not the fault of the cut-outs? Also, what should the charging rate be while driving at 40 or 50mph, (with no lights on)?
Thanks in advance, Doug.
1934 is offline   Reply With Quote