View Single Post
Old 04-15-2020, 12:54 PM   #15
30 Closed Cab PU
Senior Member
 
Join Date: Aug 2018
Posts: 2,332
Default Re: crank pulley issue

Quote:
Originally Posted by flan30 View Post
I won't say I see anything wrong with this type of pulley set up now that I've taken it apart and looked things over, but when I first looked at it I was under the impression that model A's had a one piece pulley and this one definitely had a two piece set up in it. Like I said I'm new to working on model A's so I reached out to those with more experience, now that I know what's in the car i'll know what not to do the next time. I greatly appreciate the knowledge and wisdom I'm receiving from all of you.


thanks Jim


I have the 2 piece, have not had issues. But as a part of maintenance inspect it frequently to make sure it is OK - so far (3 years) no issues.


If they loosen, then things go south. Or if the assembly does not properly seat together, and against the crank properly.
30 Closed Cab PU is offline   Reply With Quote