Quote:
Originally Posted by 700rpm
They help, and they seem to be almost spring steel. Not sure you could make effective rings from plain wire, but maybe you have something else in mind. The wire diameter is about 3/16. I suggest just ordering a couple. They fit the inside diameter of the lens bezel.
|
Thanks 700rpm,
I have tons of Music Wire (spring steel) here in a whole slew of sizing. I'll look at 3/16" (.187) and some 1/8" (.125) and construct a pair.
When installed, do the end's touch or is there just a small amount of spring tension holding them in?
Regards
Bill