The Ford Barn - View Single Post

Flathead · 06-09-2018, 03:22 PM

Be sure the machinist understands the process. Things like crank to cam center line distance and thrust bearing set up, for starters. You don't want to ruin a good block.

06-09-2018, 03:22 PM	#4
Flathead Senior Member Join Date: May 2010 Location: Southern Maine Posts: 1,499	Re: Babbiting Be sure the machinist understands the process. Things like crank to cam center line distance and thrust bearing set up, for starters. You don't want to ruin a good block.