The Ford Barn - View Single Post - Any ideas where to put a batt disconnect?

Big Iron · 11-07-2016, 09:10 AM

I have a AA truck. It has a mat on the floor. I mounted the switch to the cross member with a bracket I made. I took off the switch handle and made a sleeve with two set screws in it. I put a six point socket in one end and put the other end on the switch. I drilled a hole in the floor for the sleeve to cum through. It is flush with the top of the floor board. You just lift up the mat and use an allen wrench to turn the switch on or off. Know one knows it is there except the people I just told on here. Paint the switch black and you don't even know it is there.

11-07-2016, 09:10 AM	#14
Big Iron Junior Member Join Date: Apr 2013 Location: MO Posts: 6	Re: Any ideas where to put a batt disconnect? I have a AA truck. It has a mat on the floor. I mounted the switch to the cross member with a bracket I made. I took off the switch handle and made a sleeve with two set screws in it. I put a six point socket in one end and put the other end on the switch. I drilled a hole in the floor for the sleeve to cum through. It is flush with the top of the floor board. You just lift up the mat and use an allen wrench to turn the switch on or off. Know one knows it is there except the people I just told on here. Paint the switch black and you don't even know it is there.