The Ford Barn - View Single Post

Bored&Stroked · 06-04-2018, 07:16 PM

On my 32 Cab, I'm running a tall Eddie Meyer 2 pot intake - which is very similar in height to a Thickstun or original Tattersfield. I took the stock 32 rod and shortened it to reach the rear carb. I have a good quality ball-bearing linkage on the driver's side. The carbs (Stromberg 48's) open really easily, no friction issues to be concerned with.

06-04-2018, 07:16 PM	#4
Bored&Stroked Senior Member Join Date: Jan 2011 Location: Central Ohio Posts: 5,068	Re: Dual Thickstun, Throttle Rod On my 32 Cab, I'm running a tall Eddie Meyer 2 pot intake - which is very similar in height to a Thickstun or original Tattersfield. I took the stock 32 rod and shortened it to reach the rear carb. I have a good quality ball-bearing linkage on the driver's side. The carbs (Stromberg 48's) open really easily, no friction issues to be concerned with.