View Single Post
Old 02-05-2020, 12:17 PM   #15
Beater
Senior Member
 
Beater's Avatar
 
Join Date: Aug 2015
Location: Southern Alberta
Posts: 582
Default Re: Clutch release shaft bushings...

Quote:
Originally Posted by Synchro909 View Post
Without wanting to be confrontational, what you guys seem to have missed is that the pedal shaft is NOT the same size as the throwout shaft. The bushes you are referring to (A 7508) will NOT fit. The pedal shaft A 7506 is 7/8" diameter while our pedal shaft is 1" diameter and not available. Sure, those bushes will do the throwout shaft in the bell housing but not the pedals ut you are correct in so far as there are no bushes between the pedal shaft and the bell housing.
I just did mine. both shafts are the same 1" and both shafts take / use the same bushings in the bellhouse and in the pedals.
Beater is offline   Reply With Quote