View Single Post
Old 01-12-2020, 07:36 PM   #6
redmodelt
Senior Member
 
redmodelt's Avatar
 
Join Date: May 2010
Location: Portland OR
Posts: 6,340
Default Re: Looking for LED replacement bulbs for tail and cowl lights

Sponsored Links (Register now to hide all advertisements)
LEDLites;
Negative ground Model T, 6 volt system;

Watch the voltage! I got one of the 1129 (single contact even pin brake light) that can be used from 6 up to 24 volts. At 6 volts it puts out very little light. The one I found further down the list is 84776 and is for 6 volts. I have not ordered one yet to try. The 1158 even pin double contact brake/tail seem to be fine but do seem to have some flutter when the standard bulb L or R turn signal is flashing (I have duel taillight with separate tail lights/brake lights from turn signals). Many of the bulbs they have listed are not polarity sensitive so can be used - or + ground. Get the ones that are rated for the voltage you are using. They do have a good description when you click on the ones you are looking at. The 5 I got were shipped unboxed in a padded envelope, keeps the shipping cost down and arrived safe.
__________________
I know the voices aren't real but damn they have some good ideas!

Last edited by redmodelt; 01-15-2020 at 08:04 PM.
redmodelt is offline   Reply With Quote