The Ford Barn - View Single Post

51 MERC-CT · 05-20-2020, 05:43 AM

Can not tell you how many individual lengths there are but any fender welt I have installed,was never pre-cut to a specific length.
Right off the roll it was attached with masking tape and all holes, slits and cutouts were installed as required.
The same procedure for each individual location, off the roll, no pre-cut length.
If you can make in one piece, then if necessary it can be cut later.

05-20-2020, 05:43 AM	#2
51 MERC-CT Senior Member Join Date: May 2010 Location: East Hartford, Ct Posts: 5,898	Re: HELP with FENDER WELT on 34 Coupe Can not tell you how many individual lengths there are but any fender welt I have installed,was never pre-cut to a specific length. Right off the roll it was attached with masking tape and all holes, slits and cutouts were installed as required. The same procedure for each individual location, off the roll, no pre-cut length. If you can make in one piece, then if necessary it can be cut later. __________________ DON'T RECALL DOING SOMETHING FOR MYSELF BASED ON SOMEONE ELSE'S LIKES OR DISLIKES Last edited by 51 MERC-CT; 05-20-2020 at 06:23 AM.