The Ford Barn - View Single Post

quickchange34 · 10-08-2011, 07:29 PM

If you have a press on gear, I dought you will on a 40. Use a aluminun gear going back. Pre heat the gear real hot with a propane torch. It will go right up on the cam easy.Let it cool. Make sure you wear a pair of gloves when you pick it up to install. Line up your marks. You have to move quick from the heat to the cam.

10-08-2011, 07:29 PM	#8
quickchange34 Senior Member Join Date: May 2010 Location: charlottesville, Va. Posts: 589	Re: cam gear If you have a press on gear, I dought you will on a 40. Use a aluminun gear going back. Pre heat the gear real hot with a propane torch. It will go right up on the cam easy.Let it cool. Make sure you wear a pair of gloves when you pick it up to install. Line up your marks. You have to move quick from the heat to the cam.