The Ford Barn - View Single Post

Ruth · 06-10-2021, 11:33 PM

ET, I have not used the copper gasket for the joint but have had good success with the sleeve that the vendors sell and hi-temperature exhaust sealant. I also like the "No-nut" clamp.

https://www.snydersantiqueauto.com/P...earchByKeyword

06-10-2021, 11:33 PM	#2
Ruth Senior Member Join Date: May 2016 Location: Glide, Oregon Posts: 1,339	Re: Exhaust leak...BADDDD!!! ET, I have not used the copper gasket for the joint but have had good success with the sleeve that the vendors sell and hi-temperature exhaust sealant. I also like the "No-nut" clamp. https://www.snydersantiqueauto.com/P...earchByKeyword __________________ Ruth "Sometimes you really DO need to read the whole thread"