[The Master Cylinder]

Originally Posted by California Travieso

I like your floorboards. Did you forget to leave access for the battery?

I had to replace my battery recently and it’s a PIA removing the rubber mat and the floorboard. You can enlarge the stock narrow access hole and the suppliers sell a larger plate so you can take the battery out without having to take out the floor board but you can use some sheet metal to cover the hole.

David Serrano

Or you could get a kit like this and only have to remove half of the floor to get at the battery. https://www.snydersantiqueauto.com/P...earchByKeyword

or make your own, easy enough to do.