Quote:
Originally Posted by Tom Wesenberg
A weak spark could be caused by a poor condenser or coil, but I'd try the condenser first. Changing the stock condenser is very quick and easy if you follow these steps exactly:
1. Lay the new condenser next to the distributor.
2. Remove the ground screw first, then walk to the drivers's side.
3. Remove the terminal screw and while keeping light pressure on the screw, slip the old condenser out and the new condenser in, and tighten the terminal screw.
4. Go to the passenger side and install the ground screw. Done and easy!
|
Tom,
With regards to #3, how do you keep pressure on the screw if you remove it?
Marc