[Terry,OH]

There are only a couple of small brads that go between the drip tray and the wood surround. The tray is held in place, under the wood surround, in the rear with two brackets that go to the two hinges and in the front the lip on the tray is above the package shelf with (7) 1/4-20 flat head countersink head screws holding the shelf to the tray. So the wood surround first, then the glass channel and top seal, the glass and window regulator and two front wood pieces, then after the wood is done and the window works, the drip tray, and finally the package shelf. The shelf also is screwed to the wood under the quarter windows, two wood screws on each side.