The Ford Barn - View Single Post - Carb backfire when release accelerator

katy · 05-29-2021, 10:28 AM

I hope you ensured that there is a bit of lubricant on the points cam in the distributor. There should be a bit of grease or vaseline on it, not too much. Also check the surface of the cam, it should be super smooth.

05-29-2021, 10:28 AM	#12
katy Senior Member Join Date: Jun 2015 Location: Red Deer, Alberta Posts: 5,046	Re: Carb backfire when release accelerator - Part 2 I hope you ensured that there is a bit of lubricant on the points cam in the distributor. There should be a bit of grease or vaseline on it, not too much. Also check the surface of the cam, it should be super smooth. __________________ If you don't hear a rumor by 10 AM, start one!. Got my education out behind the barn!