The Ford Barn - View Single Post

40 Deluxe · 08-07-2018, 10:48 PM

Has anyone used a 4 1/8" stroke crank with stock 4" stroke pistons? This would put the piston .0625" closer to the head, and in the case of post #3 would be close to ideal with a little hand work.

08-07-2018, 10:48 PM	#10
40 Deluxe Senior Member Join Date: May 2010 Location: now Kuna, Idaho Posts: 3,779	Re: Piston to head clearancing Has anyone used a 4 1/8" stroke crank with stock 4" stroke pistons? This would put the piston .0625" closer to the head, and in the case of post #3 would be close to ideal with a little hand work.