Sponsored Links (Register now to hide all advertisements)
Doug: That's what I thought. Whoever installed your seat cushion did not run the listing wire (rotorwrench term). (We learn from each other. ) You have the seat bead that that runs 7 inches from the leading edge of your cushion, but no crease. I also see that the bottom edges of your cushion are crimped to the spring as original. Nice job of that. To remedy, you would have to uncrimp your cushion from the spring and run the listing wire, split the cotton batting, in order to create the original crease as original. That will be a LOT of work. Our seat covers were a battle to get the bottom edge bead crimped to the spring. You seats look lovely as is. I would leave them be.