Re: 29 Roadster Seat Springs
It looks like you have the right front seat cushion spring with the valley for the front cushion crease, but the cover was installed wrong. I can see the cross wire that should be strung through a presewn loop that runs across the length of the cushion about 8 inches front he front edge, which will leave a nice crease across the seat cushion.
This is my Phaeton front seat from Snyders. Same as roadster. See the crease across the front? Underneath, the cross wire cannot be seen because it's strung through the cover. Yours is visible. Could you post a photo of the top of your cushion? The problem we had with the crease is that it disappeared in the middle because the wire would give and bow upwards. So we anchored it with zip strips get a nice even crease. (third photo). Probably wrong, but it worked.
|