Quote:
Originally Posted by V8COOPMAN
Ian...You're 90% there with the pedals and pedal bracket that you already have. With those pieces bolted in place, and figuring the dimensions on your newly-modified bracket to place the M/C pushrod just low enough to clear the crossmember, you should be able to calculate the dimensions ( YOUR calculations) for a SIMILAR bellcrank and cross-shaft shown in the following picture. I wouldn't feel in the least guilty about going forward with that general idea. DD
|
Thanks! Im going to weld up my bracket the rest of the way tonight. This weekend ill brainstorm with some pcs of wood and see what happens...I think i can whip something up that will work...Thanks for the help! Everyone else, thanks for your help too!