06-03-2015, 03:31 PM
|
#15
|
Senior Member
Join Date: Jun 2010
Location: St Croix Falls WI
Posts: 2,080
|
Re: Need a picture PLEASE
Answer to first part = read your own post 9 .
Answer to second part yes it is indeed bent up . Notice how close the bars are together on the straight one and they are parallel . Notice yours are almost parallel and are far apart . Yours will hit on the inboard end long before they get as close together as the straight one . FWIW this is eons old info on dealing with flung open doors on 33-34 cars .
Quote:
Originally Posted by JSeery
Very strange reply. Not sure what the big banana and idiot comments are about?
The hinge you are refer to is not bent, it is a detached door with the door frame still attached. The door frame is partly open and the photo angle makes it look a little strange. It was not a good photo to post in the first place.
|
|
|
|