08-21-2019, 08:54 AM
|
#7
|
Senior Member
Join Date: May 2010
Location: Windy City
Posts: 2,919
|
Re: Which tap and die set
Ford used rather tight clearance tolerances on many fasteners. If you buy the average tap/die set it will be fit class 2A/2B and you will ruin parts if you use the taps/dies to clean up nicked threads. You need a set with 3A(external) & 3B(internal) clearance tolerances.
My go-to for taps/dies with the clearance specs I want is MSC Industrial Supply Direct Co. Inc. (US) https://www.mscdirect.com/
|
|
|