View Single Post
Old 03-27-2020, 12:25 AM   #4
50fordcoupeman
Senior Member
 
50fordcoupeman's Avatar
 
Join Date: Mar 2016
Location: LaGrande Oregon
Posts: 649
Default Re: 55 ford Ranch wagon/ LED question?

Quote:
Originally Posted by miker98038 View Post
I haven't looked into this in some years. But early on with LED's you needed a different flasher, and they were a 3 wire. 3rd wire was ground, IIRC. The original wiring on my bird was a 2 wire and the flasher was in a clip by the steering column as I remember. So running the 3rd terminal to ground should solve it.

Edit. I went and looked, Jets shows them for both 2 and 3 terminals now.

https://www.jegs.com/p/JEGS/JEGS-LED...72412/10002/-1

Miker........you are correct. I put them in my 12V avatar and all I did was to install the bulbs-nothing else.
50fordcoupeman is offline   Reply With Quote