Thread: How to attach a Turn Signal Flasher
View Single Post
Old 08-22-2018, 04:02 PM   #11
eagle
Senior Member
 
eagle's Avatar
 
Join Date: Aug 2011
Location: Eagle Bend, MN
Posts: 2,025
Default Re: How to attach a Turn Signal Flasher
Quote:
Originally Posted by Fred K-OR View Post
I did the same except I used white tape.

One thing I did was to get one of the flasher blinker things that makes a noise to let me know it was on. Problem with the one I got, it sounds like a big rig backing up-to loud.
Just tape over the hole that the sound comes out of. More or less covering the hole, volume control!
__________________
"There are some that can destroy an anvil with a teaspoon and shouldn't be allowed to touch anything resembling a tool."
eagle is offline   Reply With Quote