The Ford Barn - View Single Post - 1930 Fordor Town Sedan Front Seat: Need More Leg Room

Terry, NJ · 01-27-2015, 11:31 PM

I have a 30 Briggs T.S. and I've done rather extensive work on the seats. I would think that it is possible. At most it would require (I think) new mounting holes in the seat base. Remove the cushions and you will see the holes that attach it to the sliding rails.Go to my album in my profile , "My A". However, When you get the cushion off, make sure the sliding adjustment is not jammed somehow and preventing it from going back the full distance. Good Luck!
Terry

01-27-2015, 11:31 PM	#4
Terry, NJ Senior Member Join Date: May 2010 Location: Bucks Co, Pa Posts: 3,740	Re: 1930 Fordor Town Sedan Front Seat: Need More Leg Room I have a 30 Briggs T.S. and I've done rather extensive work on the seats. I would think that it is possible. At most it would require (I think) new mounting holes in the seat base. Remove the cushions and you will see the holes that attach it to the sliding rails.Go to my album in my profile , "My A". However, When you get the cushion off, make sure the sliding adjustment is not jammed somehow and preventing it from going back the full distance. Good Luck! Terry