Thread: Marsden nuts
View Single Post
Old 09-16-2019, 08:15 AM   #5
Seth Swoboda
Senior Member
 
Seth Swoboda's Avatar
 
Join Date: May 2010
Location: Southern Illinois
Posts: 3,744
Default Re: Marsden nuts

Quote:
Originally Posted by 35fordtn View Post
A 1936 did not Originally use marsden nuts. From 1935-41, a 3/8-24 hex nut was used and then from 42 up a 3/8-24 thin marsden but was used. The original 35-41 links with longer threads are hard to find. The service replacements and reproductions have shorter threads with the intentions of using the thin marsden nut.
This guy here is a wealth of knowledge. If there was a PhD offered in 32-53 Fords, he'd have one.
Seth Swoboda is offline   Reply With Quote