View Single Post
Old 09-04-2019, 07:31 AM   #11
Tinbasher
Senior Member
 
Tinbasher's Avatar
 
Join Date: May 2010
Location: Innisfil, Ontario Canada
Posts: 977
Default Re: Dealing with pitted body panels?

Fordcragar. You'll get no reaction from the topcoats as the primer has a activator. Not unless you put something over it with lacquer thinners in it. Then you'll sometimes get it wrinking, but you have to put it on really wet. Aermotor. Not a good idea to use Ospho or any kind of metal conditoner over sandblasted surfaces as the it will stay in the pits and cause rusting under the primer. I've had this problem in the past. JP
Tinbasher is offline   Reply With Quote