View Single Post
Old 09-05-2016, 04:38 PM   #4
Motorhead6
Senior Member
 
Join Date: Jul 2012
Location: Orange Park, Fl
Posts: 406
Default Re: Transmission cleaning

X2 on the scrape and pressure wash. Final clean with some mineral spirits or kerosene and a brush then pressure wash that away. It is going to be very hard to keep all of the water out of it; be sure to tape up the vent and filler tubes, the cooling line fittings and front and rear seals and then keep the high pressure water away from those areas. If you open it up to be sure nothing has intruded, be nice to the filter as they are very hard to impossible to find. Recommend just thoroughly clean the one you have.

A friction modifier may help that shift. I am assuming it is the aluminum case 2 speed automatic.
Motorhead6 is offline   Reply With Quote