The Ford Barn - View Single Post

ford38v8 · 11-22-2012, 03:06 PM

Looks like a '38 or '39 standard, but not sure about that round logo. Look on the underside for a date of manufacture. If it is Ford, it would be the imprint from a date tag tacked onto the mold.

11-22-2012, 03:06 PM	#2
ford38v8 Senior Member Join Date: Jul 2011 Location: SF Bay Area Posts: 6,648	Re: Intake manifold ID... Looks like a '38 or '39 standard, but not sure about that round logo. Look on the underside for a date of manufacture. If it is Ford, it would be the imprint from a date tag tacked onto the mold. __________________ Alan