The Ford Barn - View Single Post

BRENT in 10-uh-C · 10-07-2019, 08:08 AM

Use a chemical rust remover such as Evapo-rust or Rust911 first. Then either remove the remaining plating electronically or let the plater do it. It is very easy to ruin a gear shift lever if it has much pitting, or needs much buffing. It is hard for them to keep the stick from becoming wavy.

10-07-2019, 08:08 AM	#2
BRENT in 10-uh-C Senior Member Join Date: May 2010 Location: Eastern Tennessee Posts: 11,516	Re: Replating Gear Shift Lever Use a chemical rust remover such as Evapo-rust or Rust911 first. Then either remove the remaining plating electronically or let the plater do it. It is very easy to ruin a gear shift lever if it has much pitting, or needs much buffing. It is hard for them to keep the stick from becoming wavy. __________________ . BRENT in 10-uh-C . www.model-a-ford.com ...(...Finally Updated!! ) .