The Ford Barn - View Single Post

42merc · 09-05-2017, 05:57 PM

I believe Moon was grinding Potvin cams (Bill Jenks).
Potvin Super 3/8 for the V8 flathead would be .375" lift at 280 degrees duration.
.010 & .012 clearance.

09-05-2017, 05:57 PM	#7
42merc Senior Member Join Date: Feb 2011 Location: Buchanan, MI Posts: 676	Re: "Moon cam"...any information? I believe Moon was grinding Potvin cams (Bill Jenks). Potvin Super 3/8 for the V8 flathead would be .375" lift at 280 degrees duration. .010 & .012 clearance.