The Ford Barn - View Single Post

KR500 · 07-29-2018, 11:31 PM

Herm the brass shims makes perfect sense to attain the correct camshaft to crank center to center dimension. I notice you use the Kwik Way kwik clamp bolts. I see you use a Storm Vulcan rod groover also. What depth is usually desired for the tool bit to enter the babbitt? Do you also chamfer the rod oil holes?

07-29-2018, 11:31 PM	#15
KR500 Senior Member Join Date: Mar 2012 Location: Addison,ll. Posts: 454	Re: Centering a Model A Crank, in a Block ! Herm the brass shims makes perfect sense to attain the correct camshaft to crank center to center dimension. I notice you use the Kwik Way kwik clamp bolts. I see you use a Storm Vulcan rod groover also. What depth is usually desired for the tool bit to enter the babbitt? Do you also chamfer the rod oil holes?