Re: Accelerator Linkage Modification
Most of the steel on early Ford cars is bendable cold. I have bent the same part in my car. My advice is to take the control rod off first then bend the accelerator shaft so that not only do you get full throttle but that the car will idle too. You can also buy a rod extension from Snyders to make the rod longer. See https://www.snydersantiqueauto.com/p...9546&cat=41663
__________________
A is for apple, green as the sky.
Step on the gas, for tomorrow I die.
Forget the brakes, they really don't work.
The clutch always sticks, and starts with a jerk.
My car grows red hair, and flies through the air.
Driving's a blast, a blast from the past.
|