Re: Spark Plug Protrusion into Head?
Anthony, if you can't or won't solve your plug issue with the washers then you'll need "spacers/bushings", these are machined as a 1-piece item. We've done this with a number of customers including a few members up here!
They can be machined (as mentioned above, I think a few times) to any required lengths to make up the needed "thickness", been doing this for years now! It is a bit more expensive than the washer deal but it is what it is so to speak!
Thanks, Gary in N.Y.
P.S. Here's a shot of the "bushing" sitting on a plug, the one pictured is ready to be finish-machined for the needed heights.
|