The Ford Barn - View Single Post

Synchro909 · 11-01-2019, 03:50 PM

I only use cam followers and tappets with the interference fit threads. Adjustment may be fiddley but if you calculate how much turning the tappet say, one face (1/6th of a turn) will make to the clearance, it doesn't take long. Your car is LHD which makes it MUCH easier.

11-01-2019, 03:50 PM	#4
Synchro909 Senior Member Join Date: Jun 2014 Location: Melbourne, Australia Posts: 7,496	Re: Adjustable plungers / valves I only use cam followers and tappets with the interference fit threads. Adjustment may be fiddley but if you calculate how much turning the tappet say, one face (1/6th of a turn) will make to the clearance, it doesn't take long. Your car is LHD which makes it MUCH easier. __________________ I'm part of the only ever generation with an analogue childhood and a digital adulthood.