The Ford Barn - View Single Post

Tom Wesenberg · 08-31-2019, 10:18 PM

The first thing I'd do is make sure the toe-in is 1/16" and make sure the front wheel bearings aren't too loose. My temporary front axle is worn very sloppy, but I've never had the death wobble.

08-31-2019, 10:18 PM	#4
Tom Wesenberg Senior Member Join Date: May 2010 Location: Mpls, MN Posts: 27,582	Re: shaking front end The first thing I'd do is make sure the toe-in is 1/16" and make sure the front wheel bearings aren't too loose. My temporary front axle is worn very sloppy, but I've never had the death wobble.