Quote:
Originally Posted by Henry Hopper
It will all have to be done with the body on the chassis so I’ve got my work cut out.
|
I've done these types of jobs with the body on the frame . . . what a complete PITA. To be honest, in every case I would have saved time, money and a ton of aggravation if I'd pulled the body. Also, the results would almost always be better.
First of all, any fabrication/welding you have to do is really difficult when you can only access things and weld from below. There will be quite a bit of work in the frame center area - no way around it. Then think about the master cylinder setup, brake lines, wiring, etc . . . the list goes on and on.
So - seriously think about pulling the body and making your life easier and the work a lot better.
My 3 cents! LOL