The Ford Barn - View Single Post

Gold Digger · 05-19-2018, 09:27 PM

I think I've figured out how I'll use it in this B John Deere. I'll take the bottom radiator hose loose and put a elbow on there that stands straight up and at least as high as the top of the block. Then I'll drain the crankcase of oil and leave the plug out so any water leaking in there can drain out. What I don't know is how I will heat the block with the waterglass in it. And do I need to circulate what water I have in the block to make it work?

05-19-2018, 09:27 PM	#16
Gold Digger Senior Member Join Date: Nov 2011 Location: Arkansas & Alaska Posts: 645	Re: The right way to use waterglass I think I've figured out how I'll use it in this B John Deere. I'll take the bottom radiator hose loose and put a elbow on there that stands straight up and at least as high as the top of the block. Then I'll drain the crankcase of oil and leave the plug out so any water leaking in there can drain out. What I don't know is how I will heat the block with the waterglass in it. And do I need to circulate what water I have in the block to make it work?