Quote:
Originally Posted by jg61hawk
can you just use the meter to test continuity with the fuse...just one side and the other and the meter beeps or reads 0.
Please eliminate the fuse and holder ASAP. You understand the fuse holder only allows the voltage to move from the wire on the battery to the other wire...it can't be positive and negative at the same time. Use the engine block as your red positive ground and put your black tester on each end of the fuse holder. Only one end should have juice.
|
Continuity:
Radiator side fuse holder connection:
Flywheel side connection:
Sent from my iPhone using Tapatalk